- Download tcpgen.exe to on the windows PC - https://ncloud.dssl.ru/s/psta3bFS7K9SjiGXFJM6nrr8zRFaKA
- Download POS dump to on the PC - https://ncloud.dssl.ru/s/HzEP9Rw4yTwKsYkKaoJY5LTSt2feEr
(Optional) Download the video clip for testing with a cashier - https://ncloud.dssl.ru/s/sYLHPAK66G9JZ9ZoeK69GMPAWd2BLt - Open up Trassir Server
Go to Plugins → ActivePOS → Terminals
- Click "Add terminal"
Enable the terminal
Enter the name for it (or leave by default)
IP Address should not be changed, leave the field empty - we are sending POS dump directly to the server itself
Choose the Port, you can leave 2555 by default
TCP/UDP - choose TCP
Enter correlated channel where you're planning to see the transactions online
Choose the corresponding protocol. For the dump file https://ncloud.dssl.ru/s/HzEP9Rw4yTwKsYk the Protocol should be DSSL_XML_RETAIL
Below you can see the positions, character settings for the Subtitles display. Default is good for 1 pos dump display on 1 channel, if you're planning to view more dumps on 1 channel,
you have to add more terminals and change Subtitles settings so the transactions from dumps will not cross each other.
You can also change the transactions (events) colors if default colors are uncomfortable. For that, find "Event Colors" setting in the same window below
- Run tcpgen.exe as administrator
Choose TCP/IP in Protocol field
Enter server's IP address. If you are using same PC for Trassir Server and tcpgen, enter localhost IP address - 127.0.0.1 or enter LAN IP address of the Windows PC - either will work (also you can port-forward for WAN access)
Enter the port which is installed in Terminal settings
Choose the file from your PC by clicking the "Open" button
You can enable "Stop send if end of file" function if you don't want to continuously send the dump to the server
You can change the "Delay" parameter to slow down the transaction sending
You can increase the "Length" parameter to send more transactions simultaneously. 256 by default is Ok for 1 transaction at the time
Click "Connect" - if successfully - you'll see the "Connected!" message. Otherwise - double-check the settings from this instruction
Информация By clicking the "Disconnect" button you won't pause the dump sending - it will fully stop
- Return to Trassir Server or to Trassir Client which is connected to Trassir Server where the pos dumps are being sent
Go to corresponding channel which is installed in Terminal settings
Right-click on the video window → click "View Options" → go to common → enable Show figures → enable "Subtitles" (or, if you want to see figures from other Trassir modules - enable all figures except Dynamic Heat Map (it can be viewed alone-only))
This will change the view options for all the channels which are using common settings. So you can change the view options for any channels individually.
Now you should see the transactions on the video stream
...