Вы просматриваете старую версию данной страницы. Смотрите текущую версию.
Сравнить с текущим просмотр истории страницы
« Предыдущий Версия 16 Следующий »
Before starting for the first time, first install the CR2032 battery into the motherboard slot.
Then, based on the serial number of your NVR, you need to configure the BIOS.
For all NVRs, it is important to observe the correct polarity when installing
The serial number is indicated on the sticker, which is located on the back of the recorder, on the side of the connectors.
Press F2 to enter the BIOS.
Configure the following parameters:
Switch to Advanced Mode by pressing F6.
Save settings and exit (F10 and Yes)
Aleksandr Savkin